Procuct Detail

Smart RGB LED Controller

T-1000C System Features:
1. 256-level grayscale control, software Gamma adjustment.
2. Support a variety of point, line and surface light sources.
3. Have 1 output port , and can controll 1024/2048 pcs pixel lights.
4. Offline control, play contents are stored in the SD card.
Note: When T-1000C is worked with 512 pcs lights, the transmit speed is up to 30 frames / sec. When it is worked with more than 512 pcs lights, the frame rate reduce automatically by increasing light number.
5. Store up to 16 files, then the files can be copied into SD card one by one.

BUTTON FUCTION:
7.5V—24V/5V DC power supply input,provide two power supply input, just choose one
GND Power Grounding
ERROR Error indicator
POWER Power Indicator
SD CARD SD card slot
CLK Output signal CLK
DAT Output signal DATA
GND Signal Grounding
B / A difference signal B, difference signal A
GND Signal Grounding
SET Save button(Once you press it, the setting file and speed are saved. It will play at the same speed and effect when you turn it on next time )
MODE Change lighting effects (Once you press it, you can change one mode to another)
SPEED+ Speed up
SPEED- Speed down

Specification:

Memory card	SD card(High-speed SD card is recommend when many lights need to be controlled)
Capacity	256MB-2GB
Format	FAT format
Saving File	*. led
Working Temperature	- 20 ℃~ 85℃
Working Voltage	5V~24V DC
Power Consumption	3W

Note:
1. The SD Card must be formatted every time before you copy files into it. And SD card must be formatted as "FAT" format .
2. The power supply must be turn off every time before you insert SD card into controller or extract it from controller.

Previous Products:RGB LED Controller Next Products:LED Dimmer